Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Multiphysics Contact Issues

Status
Not open for further replies.
mariusb

mariusb

Structural
Joined
Jan 7, 2009
Messages
1
Location
ZA
Good Day,

I'm in need of help regarding a structural-thermoelectric problem involving Pressure,Volt, Convection, temp. I have 3 parts, thus 3 connections.

Volt and Temp conducts across the connections only if they are Bonded with MPC. I have set the connection keyopt(1)=3. I'm also using SOLID227 for my entire model.

The moment I go for a frictional contact the model falls over. Any help will be GREATLY apeciated!!

Regards
 
Status
Not open for further replies.

Similar threads

T
  • Question Question
Accessing Named Selections of Contact Surfaces via CMSEL After Applying Condensed Geometry Not Possible
Replies
0
Views
5K
TOM1345
T
Vitkacy1989
  • Locked
  • Question Question
Contact with bolts - different results SHELL vs. SOLIDS
Replies
0
Views
986
Vitkacy1989
Vitkacy1989
tnail
  • Locked
  • Question Question
No cohesive element was generated, missing midside node(s) or other connectivity issues
Replies
0
Views
201
tnail
tnail
C.A
  • Locked
  • Question Question
why does the stress appear before two bodies come in contact(Ansys apdl)
Replies
0
Views
553
C.A
C.A
Mirghani
  • Locked
  • Question Question
How to Plot Contact Tool Results Using Path for multiple load steps??
Replies
0
Views
744
Mirghani
Mirghani

Part and Inventory Search

Sponsor

Back
Top