If you just need a receive-only antenna, you might be able to get away with a home-made coaxial dipole in a PVC tube.
If you're transmitting over the entire V/UHF frequency range and you need to provide a reasonable match for the transmitter, then one old trick is to add a 3dB power attenuator in line with the mismatched antenna. The 3dB pad will provide 6dB return loss (or more when normal cable losses are considered) and 'only' affect the transmit and receive functions by 3dB each. If you can get around 8 to 10dB of return loss, that's acceptable for many transmitters (check your manual).
Some people would shudder at the concept of using a pad in-line with the antenna, but then they purchase an expensive 'wideband' antenna that may be designed to be just as lossy to provide the same effect (but hidden, not explicit). One clue can be the relatively low power rating of many wideband antennas.
Radio Shack used to sell consumer/hobbiest V/UHF antennas for use with scanners. One was a three-element ground plane, another was a whip with two loading coils/isolators, one was a discone.
There are also some "EMC Antennas" that can provide low loss and wide bandwidth. Look for birdcage dipoles. Bring money - lots of money.