Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
multi-plane sketching
- Thread starter rpjd
- Start date
beachcomber
Mechanical
I don't really undestand what you mean.
You can sketch whatever you want on any plane.
bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
Where would we be without sat-nav?
You can sketch whatever you want on any plane.
bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
Where would we be without sat-nav?
Hi rpjd,
"3D sketcher" that you can found in AlibreDesign, not exist on SolidEdge.
You can, only, sketch on a single plan.
Regards.
MERMET Sebastien
Mecanical & Product Designer
SolidEdge ST2 & Unigraphics NX4 & 6
Dell precision 490 & Dell precision M6300
"3D sketcher" that you can found in AlibreDesign, not exist on SolidEdge.
You can, only, sketch on a single plan.
Regards.
MERMET Sebastien
Mecanical & Product Designer
SolidEdge ST2 & Unigraphics NX4 & 6
Dell precision 490 & Dell precision M6300
beachcomber
Mechanical
Ok I see now.
What is it you are trying to do?
There may be another way.
3D sketching is available in XpressRoute and Frames - that is how you define paths for tubing and frame members.
bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
Where would we be without sat-nav?
What is it you are trying to do?
There may be another way.
3D sketching is available in XpressRoute and Frames - that is how you define paths for tubing and frame members.
bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
Where would we be without sat-nav?
- Status
Similar threads
- Locked
- Question
- Locked
- Question