Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mult-view Blocks Issue

  • Thread starter Thread starter Nick75
  • Start date Start date
Status
Not open for further replies.
N

Nick75

Guest
I inserted a multi-view block that was shipped with the ADT2k6 package, after inserting it, all is good. Once I copy, rotate & mirror it, all the ones that were copy etc... do not print out & the original one does. Ive gone into the style & made sure all the views are checked according to my views etc.

Anyone else run into this issue.
 
Status
Not open for further replies.

Similar threads

jafary64
  • Question Question
LSP for edit multiple blocks (color) at once in AutoCAD
Replies
7
Views
10K
CarlB
CarlB
CAD2015
  • Locked
  • Question Question
Import a part in a selected view.....
Replies
10
Views
5K
CAD2015
CAD2015
TrustButVerify
  • Locked
  • Question Question
DRAWING CIRCLE IN NON-ISOMETRIC VIEW
Replies
1
Views
1K
TrustButVerify
TrustButVerify
FAROQOUE_VIVA
  • Locked
  • Question Question
VIEW PORT LOCK STATUS
Replies
2
Views
927
ChrisLowe
ChrisLowe
CAD2015
  • Locked
  • Question Question
Creating a file of multiple components (Assembly) in Auto CAD 2024
Replies
2
Views
1K
CAD2015
CAD2015

Part and Inventory Search

Sponsor

Back
Top