Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
MS & CS difference
- Thread starter DxT
- Start date
Mild steel is un-alloyed low carbon steel. Carbon steel is iron with only Manganese and silicon as alloying agents...no nickel, chrome , molybdenum, etc, and the ever-present carbon up to around 1.0%max.
Wrought steel designates one which has been hot or cold worked after it's initial casting as opposed to cast steel which is in the form in which it is frozen from the molten state.
Wrought steel designates one which has been hot or cold worked after it's initial casting as opposed to cast steel which is in the form in which it is frozen from the molten state.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question
