Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
MRS QUALITY
- Thread starter bsdimair
- Start date
I am not familiar with the MRS acronym that you are referring to.
But I can say that heat treatment will affect the properties of aluminum sheet.
That is WHY aluminum is heat-treated after all.
If you would care to give some more detail about what property concerns you, my answer can be more specific.
STF
But I can say that heat treatment will affect the properties of aluminum sheet.
That is WHY aluminum is heat-treated after all.
If you would care to give some more detail about what property concerns you, my answer can be more specific.
STF
bsdimair... ref a previous discussion on MRS material...
MRS Specification on 2024-T3 Sheet Stock
Regards, Wil Taylor
o Trust - But Verify!
o We believe to be true what we prefer to be true.
o For those who believe, no proof is required; for those who cannot believe, no proof is possible.
o Unfortunately, in science what You 'believe' is irrelevant. ["Orion"]
o Learn the rules like a pro, so you can break them like an artist. [Picasso]
MRS Specification on 2024-T3 Sheet Stock
Regards, Wil Taylor
o Trust - But Verify!
o We believe to be true what we prefer to be true.
o For those who believe, no proof is required; for those who cannot believe, no proof is possible.
o Unfortunately, in science what You 'believe' is irrelevant. ["Orion"]
o Learn the rules like a pro, so you can break them like an artist. [Picasso]
- Status
Similar threads
- Locked
- Question