Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Moving items from assy to assy

Status
Not open for further replies.

jlbmech

Mechanical
Joined
Aug 21, 2005
Messages
59
Location
US
Working in SE20 and I have a problem. I have parts in a top level assembly, but I need them to be in one of the subassemblies. Is there a way to move them from one to the other without having to erase them from one and redo in the other?

Thanks

SE v20 SP7 WinXP SP2
 
I'd play around on it a bit before doing your real model and saving it. I dont' think there's a good tutorial on it.

It's really usefull but if you don't use it often can take a little getting used to sometimes.

KENAT,

Have you reminded yourself of faq731-376 recently, or taken a look at posting policies: What is Engineering anyway: faq1088-1484
 
No you can't drag & drop thank goodness.
Drag & drop is reserved for re-ordering.
To transfer or disperse it is a discreet command so there is no danger of accidently moving a part from one assembly to another.


bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top