Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Move libraries to server
- Thread starter Cyklopz
- Start date
Start SolidWorks.
Look in SYSTEM OPTIONS under FILE LOCATIONS.
Make sure that any of the files here that you plan to "share" are located on your server, not your C:\.
Then make sure all your SolidWorks PCs are set-up the same.
Be aware that SolidWorks searches these file locations in the order that they're listed.
So re-order them so that the most likely location is listed first.
I've been told that this speeds things up a bit, but I admit that I'm skeptical.
There may be a few other files here-and-there that you'll need to set-up likewise, but I'm sure this will be a real good start for you.
Sounds like you just became a CAD Manager - you poor fool ;-) "Where oh where are you tonight? Why did you leave me here all alone? I searched the world over and thought I found true love. You met another and, phbbbt, you were gone."
Hee Haw![[jester]](/data/assets/smilies/jester.gif "[jester] [jester]")
Look in SYSTEM OPTIONS under FILE LOCATIONS.
Make sure that any of the files here that you plan to "share" are located on your server, not your C:\.
Then make sure all your SolidWorks PCs are set-up the same.
Be aware that SolidWorks searches these file locations in the order that they're listed.
So re-order them so that the most likely location is listed first.
I've been told that this speeds things up a bit, but I admit that I'm skeptical.
There may be a few other files here-and-there that you'll need to set-up likewise, but I'm sure this will be a real good start for you.
Sounds like you just became a CAD Manager - you poor fool ;-) "Where oh where are you tonight? Why did you leave me here all alone? I searched the world over and thought I found true love. You met another and, phbbbt, you were gone."
Hee Haw
- Thread starter
- #3
Thanks for the info. I'll look there and try to get the libraries moved over. Our IT department has taken over managing all issues in the company including engineering now so we are dealing with issues such as specific CAD software etc. I'm sure it will be fun! 
Cy
Cy
It would probably be easier to just by a new seat of SW than to go through that trouble... Good Luck!! Scott Baugh, CSWP ![[spin]](/data/assets/smilies/spin.gif "[spin] [spin]")
![[americanflag]](/data/assets/smilies/americanflag.gif "[americanflag] [americanflag]")
credence69@REMOVEhotmail.com
*When in doubt always check the help*
credence69@REMOVEhotmail.com
*When in doubt always check the help*
- Thread starter
- #5
Standing
Mechanical
- Jan 14, 2002
- 1,578
Cy,
Don’t forget to put your templates “D1.drwdot and D1.slddrt” on the server also. We also put the bomtemp.xls file out there in a write-protected directory. Then copy it to C:\Program Files\SolidWorks\lang\english\bomtemp.xls when changes are done.
Bradley
Don’t forget to put your templates “D1.drwdot and D1.slddrt” on the server also. We also put the bomtemp.xls file out there in a write-protected directory. Then copy it to C:\Program Files\SolidWorks\lang\english\bomtemp.xls when changes are done.
Bradley
- Thread starter
- #7
- Status