Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

MOV types?/motor operated valve

Status
Not open for further replies.

alhnaity

Petroleum
Joined
Jan 29, 2015
Messages
13
Location
AE
what MOV means exactly, is the actuator type always electrical? or we can call the valve actuated with fluid power actuator MOV also?
 
The M means motor, usually taken as electric, but any fluid powered MOTOR could be used. These are normally taken to be on, off, fail in position valves

A piston type actuator would normally be referred to as an XV.

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
 
In Oil & Gas we include pneumatically operated valves in the MOV category. Not sure it makes sense, but so many conventions don't. Valves with electrical actuators (generally not solenoids, but sometimes them too) are usually called MOV. Valves with hydraulic motors are almost always called MOV (even when the function is XV). Then it gets weird because both hydraulic and pneumatic linear operators are often referred to as MOV even though they are rarely fail-as-is valves and are often throttled.

David Simpson, PE
MuleShoe Engineering

In questions of science, the authority of a thousand is not worth the humble reasoning of a single individual. Galileo Galilei, Italian Physicist
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top