MOTOR FRAME SIZE

[EDTHETRICIAN]

CAN ANYONE SUPPLY OR DIRECT ME TO THE MECHANICAL DIMENSIONS
OF A MOTOR WITH A 42CYZ FRAME ?

THANX........ED [sig][/sig]

 

[jbartos]

Suggestions:
1. Check NEMA Std MG-1
2. "Baldor Motors and Drives" manufacturer states on the back of its catalog (Januray 2000): "Contact your local Baldor Office for "C" dimensions." It means dimensions associated with the NEMA Frame 42. [sig][/sig]

 

[ElektranMan]

The EASA Technical manual shows the following meanings for the suffixes on your 42 frame motor.

C = C Face mounting on drive end of motor
Y = Special mounting dimensions (Call Manufacturer)
Z = Special extension to shaft length or double shaft

Not much help. I think you need to contact the manufacturer.

 

[electricpete]

try condensed MG-1 in electronic format available free on-line (download button)

http://www.nema.org/index_nema.cfm/1427/8672E77E-D3BC-494F-A0D0CE6E55B99A74/

 

[jbartos]

Suggestion: Visit

http://www.bostongear.com/pdf/electrical_sections/electric_catalog_sec_i.pdf

etc. for more info