EDTHETRICIAN
Electrical
CAN ANYONE SUPPLY OR DIRECT ME TO THE MECHANICAL DIMENSIONS
OF A MOTOR WITH A 42CYZ FRAME ?
THANX........ED [sig][/sig]
OF A MOTOR WITH A 42CYZ FRAME ?
THANX........ED [sig][/sig]
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
MOTOR FRAME SIZE
- Thread starter EDTHETRICIAN
- Start date
- Status
jbartos
Electrical
- Jan 15, 2000
- 6,440
Suggestions:
1. Check NEMA Std MG-1
2. "Baldor Motors and Drives" manufacturer states on the back of its catalog (Januray 2000): "Contact your local Baldor Office for "C" dimensions." It means dimensions associated with the NEMA Frame 42. [sig][/sig]
1. Check NEMA Std MG-1
2. "Baldor Motors and Drives" manufacturer states on the back of its catalog (Januray 2000): "Contact your local Baldor Office for "C" dimensions." It means dimensions associated with the NEMA Frame 42. [sig][/sig]
ElektranMan
Industrial
The EASA Technical manual shows the following meanings for the suffixes on your 42 frame motor.
C = C Face mounting on drive end of motor
Y = Special mounting dimensions (Call Manufacturer)
Z = Special extension to shaft length or double shaft
Not much help. I think you need to contact the manufacturer.
C = C Face mounting on drive end of motor
Y = Special mounting dimensions (Call Manufacturer)
Z = Special extension to shaft length or double shaft
Not much help. I think you need to contact the manufacturer.
electricpete
Electrical
try condensed MG-1 in electronic format available free on-line (download button)
jbartos
Electrical
- Jan 15, 2000
- 6,440
Suggestion: Visit
etc. for more info
etc. for more info
- Status
Similar threads
- Question
- Question