Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

motherboard model needed

  • Thread starter Thread starter fpdixon
  • Start date Start date
Status
Not open for further replies.
F

fpdixon

Guest
I am working on a new project and was wondering if anyone knows where I can go to get an accurate model of an ATX form factor socket A type motherboard. The motherboard type is not all that important I just don't want to have to create all the board components from scratch. The most important features that I need to design around will be the system ram,IDE and processor sockets. Any help would be appreciated.



Rick
 
Status
Not open for further replies.

Similar threads

D
Lost Model in Drawing
Replies
0
Views
5K
Den E
D
freerangequark
  • Locked
  • Question Question
Patterning Issue - Timing Belt Model
Replies
7
Views
1K
3DDave
3DDave
freerangequark
  • Locked
  • Question Question
Model Tree, tracking part identity
Replies
2
Views
2K
geesaman.d
geesaman.d
IanX
  • Locked
  • Question Question
Creo 5 - Model check error
Replies
5
Views
877
looslib
looslib
Lion_Engineer
  • Locked
  • Question Question
Creating negative impression of another model?
Replies
8
Views
934
Lion_Engineer
Lion_Engineer

Part and Inventory Search

Sponsor

Back
Top