Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

MOS1 or MAS1

Status
Not open for further replies.
jason8598

jason8598

Mechanical
Joined
Jan 28, 2004
Messages
13
Location
US
I am looking for information about this type of steel. From what I am told the only place it is made is in Japan and is very expensive. We use the material to make die cavities and we are looking to see if there is anyone in the US that makes it.


Thank you
 
Status
Not open for further replies.

Similar threads

dandy408
  • Question Question
Strongest material heat treated or non-heat treated
Replies
1
Views
7K
EdStainless
EdStainless
enginesrus
  • Locked
  • Question Question
What brass or bronze for water couplings?
Replies
9
Views
6K
Brooke William
B
APIpipeWholesaler
  • Locked
  • Question Question
12.5 % + or - WALL TOLERANCE ON CARBON STEEL PIPE
Replies
3
Views
1K
LittleInch
LittleInch
David Maijala
  • Locked
  • Question Question
Cold forming AL alloy in W or AQ condition
Replies
4
Views
483
MagBen
MagBen
spray_arc
  • Locked
  • Question Question
Unified Numbering System UNS, Can I assign to EN or GB C/S material
Replies
2
Views
538
spray_arc
spray_arc

Part and Inventory Search

Sponsor

Back
Top