Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Moreplex 2 vs. Lubriplate 3000 for Sliding Contact

Status
Not open for further replies.
farmer2

farmer2

Mechanical
Joined
Jul 29, 2006
Messages
57
Location
US
Does anyone know which grease would be better for a sliding contact application? The softer steel is Rb 84-100, the harder steel is Rc 33-38.

Would one be better if the harder surface is rough?
 
Status
Not open for further replies.

Similar threads

Samingme755
  • Question Question
A351 Gr. CF3M VS 316 AUS SS
Replies
1
Views
398
EdStainless
EdStainless
deepu78
  • Locked
  • Question Question
DBTT-Ductile Brittle transition temperature 2 1/4 Cr-1 Mo -P22/F22 Chrome moly material
Replies
9
Views
2K
weldstan
weldstan
Radius1
  • Locked
  • Question Question
Looking for specification for identifying pearlite in cast iron sample.
Replies
0
Views
2K
Radius1
Radius1
BSMEclassof2012
  • Question Question
Brine concentration for pumps made from ductile cast
Replies
1
Views
1K
EdStainless
EdStainless
S
  • Locked
  • Question Question
Software for Material Engineers
Replies
4
Views
3K
Saman2002
S

Part and Inventory Search

Sponsor

Back
Top