Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Moreplex 2 vs. Lubriplate 3000 for Sliding Contact

Status
Not open for further replies.
farmer2

farmer2

Mechanical
Jul 29, 2006
57
Does anyone know which grease would be better for a sliding contact application? The softer steel is Rb 84-100, the harder steel is Rc 33-38.

Would one be better if the harder surface is rough?
 
Status
Not open for further replies.

Similar threads

deepu78
  • Question
DBTT-Ductile Brittle transition temperature 2 1/4 Cr-1 Mo -P22/F22 Chrome moly material
Replies
9
Views
2K
weldstan
weldstan
Radius1
  • Question
Looking for specification for identifying pearlite in cast iron sample.
Replies
0
Views
1K
Radius1
Radius1
BSMEclassof2012
  • Question
Brine concentration for pumps made from ductile cast
Replies
1
Views
1K
EdStainless
EdStainless
S
  • Locked
  • Question
Software for Material Engineers
Replies
4
Views
3K
Saman2002
S
ShabsRBI
  • Locked
  • Question
Burst Calculation for Boiler Steam Drum for RBI model
Replies
1
Views
2K
BEMPE16524
BEMPE16524

Part and Inventory Search

Sponsor

Back
Top Bottom