Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
More Help with Dimension Settings in Standards
- Thread starter Xwheelguy
- Start date
- Thread starter
- #2
Hrishiis
Automotive
- Oct 6, 2010
- 6
I am not sure how to create a setting for this requirement but a very crude way to do this for a few dimensions would be to use 'Fake Dimension' and assigning the required number of spaces before the actual real value.
I did have a go at setting the dimensions 'prefix' as 'R ' (or similar with diameter symbol) but Catia seems to ignore the spaces in this case.
Do let us know if you find a way to 'set' this although I fail to see when I might feel the need to use it..!
Rishi Mandyam
Automotive Design Engineer
Catia V5 R12 - latest
Chelmsford, UK
I did have a go at setting the dimensions 'prefix' as 'R ' (or similar with diameter symbol) but Catia seems to ignore the spaces in this case.
Do let us know if you find a way to 'set' this although I fail to see when I might feel the need to use it..!
Rishi Mandyam
Automotive Design Engineer
Catia V5 R12 - latest
Chelmsford, UK
- Status
Similar threads
- Locked
- Question
