Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations The Obturator on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Monitoring Power Consumption 3

Status
Not open for further replies.

BigInch

Petroleum
Jun 21, 2006
15,161
Looking for a portable industrial quality power monitoring system that could be temporarily and conveniently "clamped on" to each of a number of principal electrical power consuming devices to "simultaneously and continuously" record power consumption of each individual device, preferably wirelessly connected to data storage, with an open data communication protocol and remote monitoring possible via internet.

Any suggestions as to where I should look for such a system?

Thanks,


"What gets us into trouble is not what we don't know, its what we know for sure" - Mark Twain
 
Replies continue below

Recommended for you

Hi BigInch.
Please see attached.
thread238-216236
Best Regards.
Slava
 
And additional
thread238-206531
Hope that help.
Good Luck
 
Slavag,

Thanks very much for the headstart.
Looks like I should be able to find what I need.


"What gets us into trouble is not what we don't know, its what we know for sure" - Mark Twain
 
Thanks Roy. I have energy efficiency studies in mind, so I need logging and the convenience of clamp-ons. Yes it looks like these will work too. Appreciate the additional info.


"What gets us into trouble is not what we don't know, its what we know for sure" - Mark Twain
 
Zog, Good stuff. I like the demos and the explicitly stated RS232 interface.

Thanks to everyone. Reached info overload.
Give me some time to sort.


"What gets us into trouble is not what we don't know, its what we know for sure" - Mark Twain
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor