Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Molding with glass filled materials

Status
Not open for further replies.
prodeng

prodeng

Mechanical
Jun 8, 2000
49
When a glass filled material (like PP) is injected into a mold, what keeps the glass from migrating to the molded surface?
 
Status
Not open for further replies.

Similar threads

Buckshott00
  • Locked
  • Question
Process Setting for Improved Over-molding to prevent delamination In Molded Hytrel
Replies
0
Views
865
Buckshott00
Buckshott00
Splint
  • Locked
  • Question
Rotomolding materials suppliers in Australia - small quantities
Replies
0
Views
720
Splint
Splint
Kami.K
  • Locked
  • Question
Bonding glass to plastic 1
Replies
5
Views
1K
TugboatEng
TugboatEng
jlw1950
  • Locked
  • News
Steel Rotolining with micropellets (0,5mm) instead of powders (0,1-0,5mm)
Replies
0
Views
678
jlw1950
jlw1950
DogPAnt
  • Locked
  • Question
Water sealing problem with epoxy and PVC
Replies
5
Views
893
DogPAnt
DogPAnt

Part and Inventory Search

Sponsor

Back
Top Bottom