Does it make sense to wrap moisture barrier up and around slab edges and sealing all the joint and gaps to make it virtually air tight? Location is kind of damp and sheet of vapor barrier left on the ground will show drops of water on the underside in less than a day. Would enough moisture migrate into the slab sideways to cause issues with epoxy floor coating?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Moisture barrier over slab edges
- Thread starter enriko12
- Start date
Similar threads
