Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Modulus of Elasticity approximation from Shore Hardness - Ruess formulas
- Thread starter MR5FLOW
- Start date
EdStainless
Materials
You can develop these for each specific polymer.
But even if you change the compounding too much they no longer apply.
And some polymers just don't follow these relationships.
It is much easier to actually test a sample and get a real number.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
But even if you change the compounding too much they no longer apply.
And some polymers just don't follow these relationships.
It is much easier to actually test a sample and get a real number.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question
