Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Modifying "On Path" sketch location (NX5) 1

Status
Not open for further replies.

speedster29

Mechanical
Joined
Mar 25, 2008
Messages
100
Location
US
Hi all,

When you create a sketch on a path an locate it using the "percentage of arc length" option, can you go back and edit the location? I'm trying to do that and I can't find a way.
 
Nevermind, I found it. It is an Expression called "Datum On Path Percentage"
 
Too bad you can't give yourself a 'Star' for answering your own question (but I'll give you one for not sitting back and waiting for an answer but continuing to look for it on your own as it's amazing what you can learn by just poking around and 'kicking' something to see what 'moves' ;-)

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

To an Engineer, the glass is twice as big as it needs to be.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top