Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

modes confirmation from transmissbility curves

Status
Not open for further replies.

vibract

Automotive
Mar 6, 2007
21
Dear members,
I request you to please confirm the number of modes ( if possible with approximate modal frequencies) in the picture which can be found at
That curve is in between transmissibility ratio (acceleration ratios) and the excitation forcing frequency.

Regards
 
Replies continue below

Recommended for you

I'm afraid you'll have to use a better hosting servicwe than that. i am not waiting 3 hours for a download

Cheers

Greg Locock

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
 
Better yet, try this:
trans.png


=====================================
Eng-tips forums: The best place on the web for engineering discussions.
 
Ta

Oh well, whetever data that is it bears no resemblance to anything that I would try and analyse by eye.





Cheers

Greg Locock

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
 
What did you expect to see in a span of 16 Hz?

TTFN

FAQ731-376
 
...without phase information, and an unknown resolution, tho it looks to be about 1 Hz.

What window was used?



Cheers

Greg Locock

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor