Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Modelling Well Fluid as Black Oil

Status
Not open for further replies.

asade

Chemical
Oct 19, 2010
65
Good day All,

At what condition do one need to model a well fluid as black oil in the absence of well fluid compositional data?
Is there a rule of thumb to determine flowline pressure when FTHP is available?

Thanks for your response in advance.



I am what I am by His grace
 
Replies continue below

Recommended for you

The bean (choke) size, fluid flow rate, FLTHP, Oil S.G, Gas S.G and GOR are available.

I am what I am by His grace
 
When the analysis of each suggests that the difference in the pressure drops, or other critical parameter of interest, is greater than the margin of error that you are prepared to deal with.

I hate Windowz 8!!!!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor