Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Modelling spiral bevel gears

  • Thread starter Thread starter hiro
  • Start date Start date
Status
Not open for further replies.
H

hiro

Guest
Could any one give me an advise how I can start off modolling spiral bevel gear?
 
hello,



if you are a PTC customer you can search the knowledge base of Parametric and you can see that in the suggested technics topic there is is an example of creating a spiral bevel gear.





xcad
 
hello,



if you are a PTC customer you can search the knowledge base of Parametric and you can see that in the suggested technics topic there is is an example of creating a spiral bevel gear.





xcad
 
Status
Not open for further replies.

Similar threads

DesEng1986
  • Locked
  • Question Question
Part Modelling Datums
Replies
0
Views
301
DesEng1986
DesEng1986
J
CREO Elements Direct Modelling conversion
Replies
0
Views
3K
JosRoc
J
N
Modelling of tubercles on aerofoil
Replies
1
Views
7K
design-engine
D
T
wire mesh basket modelling
Replies
3
Views
9K
design-engine
D
R
Dynamic section arrow position
Replies
0
Views
3K
Ricktherazor
R

Part and Inventory Search

Sponsor

Back
Top