Modelling Operation Error 1

[AutoAngst]

I was attempting to extrude a circle along a curved polyline path with quite a few vertices, and AutoCAD 2005 flatly refused, and gave the response; 'Modeling Operation Error:Exceeded stack limit'. Does anyone have an idea of what this means? and if so, could they please suggest a way around this problem?
Alternatively, I could perhaps drop my machine on the head of the next AutoCAD salesman from a very high height?

 

[Exxit]

AutoAngst,
I don't know this message, but I think you got it... The end of your machine...

http://usa.autodesk.com/adsk/servlet/ps/item?siteID=123112&id=2895845&linkID=9240617

So try the alternative

Lothar

ADT 2004

 

[AutoAngst]

Exxit,

I might just do that! If Autodesk can't answer this question - what hope have the rest of us got?!!

Actually I found a way around the problem by splitting the path into two halves - it was the only way I could get it to work.

Having looked at other AutoCAD forums, it seems pretty clear that AutoCAD doesn't handle solid modelling very well, good luck in developing your software guys.

 

[Exxit]

...or you have high and/or negative values...

ADT 2004