Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Modelling debonding in abaqus

Status
Not open for further replies.
michaelchqwva

michaelchqwva

Civil/Environmental
Joined
Nov 5, 2011
Messages
2
Location
ZA
Hi All

May anyone help me with modelling debonding using cohesive elements in abaqus. I am making a 2D model of a reinforced concrete beam strengthened with FRP. I have used cohesive elements for modelling the adhesive interface between the concrete and the FRP. My model is running but I cannot see the debonding. I would really appreciate your help.

 
Status
Not open for further replies.

Similar threads

spyros_ar
  • Locked
  • Question Question
Modelling a sandwitch structure in Abaqus
Replies
6
Views
3K
FEA way
FEA way
G
  • Locked
  • Question Question
How to create this feature in abaqus part modelling?
Replies
3
Views
1K
FEA way
FEA way
E
  • Question Question
Embedded foundation in ABAQUS
Replies
3
Views
4K
FEA way
FEA way
A
  • Question Question
Recreating Ansys Sim in Abaqus
Replies
1
Views
7K
FEA way
FEA way
I
  • Question Question
Wear in abaqus
Replies
8
Views
16K
Rama27
R

Part and Inventory Search

Sponsor

Back
Top