Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Modelling collision in Abaqus

Status
Not open for further replies.

swoodb

Civil/Environmental
Joined
Mar 22, 2016
Messages
1
Location
GB
Hello all,

I am trying to model a metal ball falling into water and splashing, however the ball doesn't ever come into contact with the water, it travels straight through it. I have used general contact which works for impacts into deformable objects. The water is defined as a eulerian material. I have attached the CAE file of my model.

I would be extremely grateful for any help on this matter.

Thanks in advance
 
 http://files.engineering.com/getfile.aspx?folder=e028bf15-49e2-4963-a976-3254bf9902fb&file=Ball_Impacting_Water.cae
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top