Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Modelling a structural object surrounded by Fluid

Status
Not open for further replies.
Jlog50

Jlog50

Mechanical
Joined
Sep 16, 2010
Messages
118
Location
GB
Hello all,

I am interested in modelling a structural object under contact surrounded by a fluid to look at FSI in abaqus 6.10. Any tips on how I go about doing this. Anybody done this before or can provide any input. This would be much appreciated. Thanks
 
Sort by date Sort by votes
I am also interested in modelling contact with a lubricant between the surface to look at FSI... any advice on this, thanks.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

spyros_ar
  • Locked
  • Question Question
Modelling a sandwitch structure in Abaqus
Replies
6
Views
3K
FEA way
FEA way
spyros_ar
  • Locked
  • Question Question
Solid elements vs Continuum shell elements for modelling a core in a sandwich structure
Replies
10
Views
5K
SWComposites
SWComposites
Pam Crash
  • Solved
Fluid filled structure: Implicit transient *Dynamic analysis possible with ABaqus-Standard
Replies
6
Views
7K
jball1
jball1
A
  • Locked
  • Question Question
Coupling object movements - Jacking type movement
Replies
3
Views
2K
FEA way
FEA way
G
  • Locked
  • Question Question
How to create this feature in abaqus part modelling?
Replies
3
Views
1K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top