Sep 29, 2006 #1 Gunns Civil/Environmental Sep 29, 2006 19 Can you have a Subcatchment drain to another subcatchment before going to a pond in HydroCAD 8.0?
Sep 29, 2006 #2 LHA Civil/Environmental May 28, 2003 846 Just tried on 7.1, and it looks like you couldn't then. You can combine their hydrographs into a Link, then route the Link into a Pond. Hey, Peter, any chance of eliminating the Link? Engineering is the practice of the art of science - Steve Upvote 0 Downvote
Just tried on 7.1, and it looks like you couldn't then. You can combine their hydrographs into a Link, then route the Link into a Pond. Hey, Peter, any chance of eliminating the Link? Engineering is the practice of the art of science - Steve
Sep 30, 2006 #3 psmart Active member Feb 3, 1999 1,524 You can add the flows with a link, reach, or pond. In your case, just route the two subcats to the pond. You don't need an intermediate link. Upvote 0 Downvote
You can add the flows with a link, reach, or pond. In your case, just route the two subcats to the pond. You don't need an intermediate link.
Oct 3, 2006 #4 T TerryScan Civil/Environmental Nov 3, 2003 640 Of course, if the travel time of the flow from one subcatchment through another subcatchment is significant, one should model it as a reach so that the lag is accounted for when the hydrographs are ultimately added together. Upvote 0 Downvote
Of course, if the travel time of the flow from one subcatchment through another subcatchment is significant, one should model it as a reach so that the lag is accounted for when the hydrographs are ultimately added together.
