hi again.. thanks for replying to me. im doin some work on a quarter of a steel cylinder with calcium carbonate precipitate formed on the inner wall of the steel cylinder. i need to apply a 200micrometer diameter water spray on the precipitates, at about 10MPa. i have been able to modelt eh steel cylinder. but the precipitate, i havent been able to figure out what material model i can use in it, if i want to know the stresses and the deformations the precipitates will encounter because of the high pressure water spray. thank you.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
modeling of a compound like calcium carbonate
- Thread starter maisir666
- Start date
Similar threads
- Question