Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

modeling a solid element using SAP2000

Status
Not open for further replies.
idly123

idly123

Structural
Joined
Jun 12, 2002
Messages
96
Location
IN
Hi all,
i have a few querries,
1) Do u have a solid element with 3 translational Dofs per node in SAP 2000
2) in case itsn there how do i convert a shell or a plate to equivalent solid.
please help me out soon
regards
raj Raj
 
Sort by date Sort by votes
I meant this element:
SOLIDElement.jpg
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

M
  • Question Question
FEA Adhesive Modeling
Replies
3
Views
5K
milio000
M
vanji1
  • Locked
  • Question Question
If I want to construct myself a geometric stiffness matrix induced by a pre constraint with finite element modeling
Replies
0
Views
1K
vanji1
vanji1
Kamyar_K
  • Question Question
How to get uniform tension in a rail using dynamic/explicit analysis?
Replies
6
Views
9K
rb1957
rb1957
AhmedEltaweel
  • Question Question
stresses in girder using CSI bridge
Replies
0
Views
5K
AhmedEltaweel
AhmedEltaweel
EdwardNigma
  • Locked
  • Question Question
Mastering FEA: How to Get Through Stage 2 (Developing Good Modeling Techniques)?
Replies
7
Views
4K
rb1957
rb1957

Part and Inventory Search

Sponsor

Back
Top