Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

MODELING A CONCRETE BUILDING USING STAAD PRO2000

Status
Not open for further replies.
ERNESTOBARRERA

ERNESTOBARRERA

Structural
Joined
Sep 29, 2001
Messages
24
Location
PA
WHAT IS THE BEST WAY TO MODEL A REINFORCED CONCRETE BUILDING WITH TWO WAY REINFORCED CONCRETE SLAB, USING STAAD PRO2000, CONSIDERING THAT THE MASTER/SLAVE OPTION IS NOT PROPERLY WORKING IN THE 2000 VERSION?

I WOULD LIKE TO HEAR FROM ANYONE WHO HAS EXPERIENCE MODELING SUCH BUILDINGS IN STAAD PRO2000.
 
Status
Not open for further replies.

Similar threads

Michael Dee
  • Locked
  • Question Question
STAAD Warning help please
Replies
0
Views
1K
Michael Dee
Michael Dee
user277418
  • Locked
  • Question Question
STAAD vs others
2
Replies
27
Views
5K
GC_Hopi
GC_Hopi
justhumm
  • Locked
  • Question Question
STAAD user table (UPT) error?
Replies
3
Views
3K
dozer
dozer
Andre White
  • Locked
  • Question Question
ASCE wind exposure value for open steel frame in STAAD
Replies
0
Views
1K
Andre White
Andre White
yar.rabiv
  • Locked
  • Question Question
Sample concrete design - output not showing reinforcement
Replies
0
Views
1K
yar.rabiv
yar.rabiv

Part and Inventory Search

Sponsor

Back
Top