A
anoyes
Guest
How do you show or create dimensions in an assembly. Need to tranfer to PDF with dimensions......
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
- Status
- Thread starter
- #2
S
support
Guest
Sub-part dimensions or assy dimensions?
Hello anoyes,
Are you referring to component dimensions (within a single part) or assembly dimensions (from one component to another such as the over-all dimensions of the assembly)? Also, do you want to show the dimensions in a 3D model view or a 2D sheet view? You should be able to create a drawing sheet, add the views you want and then add the dimensions you need there.
Thanks.
3DCADTips Help Desk
Hello anoyes,
Are you referring to component dimensions (within a single part) or assembly dimensions (from one component to another such as the over-all dimensions of the assembly)? Also, do you want to show the dimensions in a 3D model view or a 2D sheet view? You should be able to create a drawing sheet, add the views you want and then add the dimensions you need there.
Thanks.
3DCADTips Help Desk
- Thread starter
- #3
A
anoyes
Guest
support said:Hello anoyes,
Are you referring to component dimensions (within a single part) or assembly dimensions (from one component to another such as the over-all dimensions of the assembly)? Also, do you want to show the dimensions in a 3D model view or a 2D sheet view? You should be able to create a drawing sheet, add the views you want and then add the dimensions you need there.
Thanks.
3DCADTips Help Desk
I am trying to dimension a 3D model to show overall dimension in an assembly mode. Will not be making drawing of this just the model w/ diminsions...
Thanks
- Status
Similar threads
