Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Modbus RTU to BACnet

Status
Not open for further replies.
steamdog

steamdog

Chemical
Nov 18, 2008
111
I am a controls novice. My PLC controller has Modbus RTU output and I need to connect to a BACnet building management system. Some controls guys I am talking to say these translators are difficult to configure. Does anyone have some hands-on experience with one that you can recommend for ease of setting up?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
ICC XLTR-1000

Super simple.

Good on ya,

Goober Dave
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

BPW363
  • Locked
  • Question
Communications protocol error codes (Modbus TCP, Modbus RTU, Fiber Optic TCP etc.)
Replies
2
Views
800
danw2
danw2
Justice100
  • Locked
  • Question
Big Valve Small valve - how to size the small valve
Replies
6
Views
977
georgeverghese
georgeverghese
kdv1988
  • Locked
  • Question
How do I convert Pulse Output from a flow sensor to RS485 / 4-20mA?
Replies
6
Views
1K
danw2
danw2
Pavan Kumar
  • Locked
  • Question
Bad Data from DCS - Need to Understand 1
Replies
6
Views
419
danw2
danw2
moltra
  • Locked
  • Question
RS-485 Modbus RTU to Wirelesshart
Replies
2
Views
357
scenes
scenes

Part and Inventory Search

Sponsor

Back
Top Bottom