Guest
Is there a simple formulae for calculating the torque required to turn a paddle D diameter, W wide, through a sludge of D1 density at N rpm? - thank you
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
diamondjim
Mechanical
Mike,
I would suggest a waste water treatment design
catalogue or book should have this info. I an
certain that they have similar paddles or mixer
blades used in treating sludge etc.
Sorry for the late reply.
I would suggest a waste water treatment design
catalogue or book should have this info. I an
certain that they have similar paddles or mixer
blades used in treating sludge etc.
Sorry for the late reply.
- Status