Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mitsubishi Analogue Card Setup.

Status
Not open for further replies.

JohnnyRingo

Electrical
Joined
May 25, 2004
Messages
9
Location
GB
Can any body tell me how to setup my A1S62DA digital to analogue card, i'm looking at the manual and i've put the code in TO H0 k0 D0 K1. but i dont seem to get any joy...
can any body with mitsubishi experience help.


cheers
 
the cpu is:
Q2ASCPU-S1
and the analogue cards is A1S62DA
its is in Slot 0, so the header address is H0, i've think i've set the relevent buffer memorys but get no output from the voltage or the Current.
Any info in addition would be great

cheers
 
Have you enabled the analogue outputs for the module ?
 
yes , got them working. They seemed to need to have the power switched off to reset and enable the software to kick in!!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top