misubishi Fseries cable - SC-03

[prgmr]

I have a cable for a Mitsubishi F-Series PLC, but I don't have a pin out or part number. I suspect it may be an SC-03, but not sure. I know about the part number PCX-KIT-1, but the other one I have is easier, no extra power needed. I would like to have another for maintenance.

 

[jimmalik]

I used to program FX series.
This is the cable we used.
Check manual for FX port, I think was RS422 or RS485.
Been a while, but look at that.

http://www.meau.com/Files/SC09.PDF

Jim

 

[prgmr]

Thanks for the reply. However, the F-Series is an older version of PLC than the FX. The F-Series cannot use the SC-09 cable.