Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mirror problem

  • Thread starter Thread starter Archibald
  • Start date Start date
A

Archibald

Guest
When I am trying to mirror my assembly I am asked for the features to mirror, but when I try to click on them on the screen or the browser it wont let me choose the parts. Where am I going wrong, any suggestions would be really appreciated.
 
Mirror Problem

If your being asked to pick feature you are using the wrong mirror command. There is a mirror command for assembly parts (5th icon from the top R11) and for parts built in assembly (4th from bottom R11).

Jason R Burns
 
If its asking for what features to mirror, you're trying to mirror assembly
features. You need to select the Mirror Components tool.
 
Which toolbar is the mirror tool under? Because i can't get it to come up. Do i have to be in the sketch? I'm trying to mirror a body
 

Part and Inventory Search

Sponsor

Back
Top