Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mini Reverb Chamber Qualification

Status
Not open for further replies.
aathi1

aathi1

Mechanical
Joined
Aug 2, 2005
Messages
9
Location
MY
Hi All,

I would like to qualify the Mini Reverb Chamber. What best method I can use for qualification the chamber.

Note: I perform the measurement at Hemi Anechoic Chamber and then measured at Mini Reverb Chamber.

Thanks

_______________________________________

Regards,

Balan.G

 
Status
Not open for further replies.

Similar threads

mrev23
  • Locked
  • Question Question
Using 'minimum static deflection' to choose a vibration isolator from a manufacturer's catalog
Replies
4
Views
888
electricpete
electricpete
supersnare
  • Locked
  • Question Question
Methods to determine the minimum amount of acceleration a MEMS accelerometer can measure
Replies
2
Views
343
IRstuff
IRstuff
Rob45
  • Locked
  • Question Question
T60 Reverberation Time Testing Question
Replies
2
Views
222
Rob45
Rob45
nearboston
  • Locked
  • Question Question
HALT Chamber vibration data
Replies
2
Views
177
nearboston
nearboston
fastNOT
  • Locked
  • Question Question
A SRS profile is used to "specify" a shock qualification test. How...
Replies
0
Views
72
fastNOT
fastNOT

Part and Inventory Search

Sponsor

Back
Top