MIL-STD-1913

[MadMango]

I found MIL-STD-1913 for the accessory mounting rail (weaver/picatinny), but cannot find the standard for the dimension of 1-inch or 30mm scope rings. Can someone point me in the proper direction?

[green]"I think there is a world market for maybe five computers."[/green]
Thomas Watson, chairman of IBM, 1943.
Have you read faq731-376 to make the best use of Eng-Tips Forums?

 

[SomeYahoo]

Some info here:

http://badgerordnance.com/productgroup.php?id=rings

 

[MadMango]

Thanks for that. I also found a similar chart from Tactical Precision Systems (TPS). The problem is, I belive the listed dimensions are "custom", as they vary from manufacturer to manufacturer. I'm looking for the MIL-STD or MIL-SPEC that actually defines the dimensions of the rings themselves (if such an animal exists).

[green]"I think there is a world market for maybe five computers."[/green]
Thomas Watson, chairman of IBM, 1943.
Have you read faq731-376 to make the best use of Eng-Tips Forums?

 

[IRstuff]

if you go to assist:

http://assistdocs.com/search/search_basic.cfm

and search for "mount telescope" without quotes, there're be a bunch of Mil Specs that refer to drawings that you might be able to get.

TTFN