Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

MicroStation Radius With Length

Status
Not open for further replies.
shakespearean

shakespearean

Civil/Environmental
Joined
Jul 19, 2002
Messages
1
Location
US
How do I create a radius with length in MicroStation?
 
Sort by date Sort by votes
Do you mean ARC by length? If so, there is no tool to do that. You have to compute included angle at centre and then draw "arc by radius and angle".
Is it what you are looking for?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

T
  • Question Question
Thermal load with thermal gradient in structural analysis
Replies
6
Views
898
Amp Dylan
A
B
  • Locked
  • Question Question
Design of Simple Lift beam with a trolley
Replies
5
Views
3K
dvd
dvd
Angelle
  • Locked
  • Question Question
Tennis Court safety with large crack
Replies
13
Views
992
NorthCivil
NorthCivil
JoeJitzu
  • Locked
  • Question Question
Need Advice for Commercial Site with Semi Trucks
Replies
4
Views
2K
TigerGuy
TigerGuy
JamieHir
  • Locked
  • Question Question
Question about Paving Roads with a dip and tying in?
Replies
1
Views
3K
swazimatt
swazimatt

Part and Inventory Search

Sponsor

Back
Top