Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Micro piles

Status
Not open for further replies.
Alicia091175

Alicia091175

Civil/Environmental
Joined
Mar 27, 2013
Messages
1
Location
AE
I have a renovation project of a mosque, the new extended structure needed micro piles.The casted micropiles seemed to have un even diameter (cast-in situ with out casing), mostly stirrups can be seen at about 2m depth from pile cut-off head. Can someone suggest me the implication of this so as rusts can be seen from the reinforcement randomly.What is the best solution?
Thanks.
 
Status
Not open for further replies.

Similar threads

W
  • Question Question
The minimum number of piles required for static load test
Replies
6
Views
10K
wangqian
W
M
  • Locked
  • Question Question
Driving Piles Through 900mm Rock Revetment
Replies
6
Views
4K
EireChch
EireChch
Sparky4598
  • Locked
  • Question Question
How does torque tell load capacity of helical piles
Replies
3
Views
5K
dik
dik
Rainer_Cambodia
  • Locked
  • Question Question
Longitudinal crack in PHC piles
Replies
2
Views
552
EireChch
EireChch
MWD123
  • Locked
  • Question Question
Minimum Spacings When Piling Adjacent to Existing (Disused) Piles
Replies
5
Views
2K
LittleInch
LittleInch

Part and Inventory Search

Sponsor

Back
Top