Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

MIC in Carbon Steel receptacle filled with still deoxygenated water

Status
Not open for further replies.
upbubble

upbubble

Marine/Ocean
Joined
Nov 3, 2005
Messages
1
Location
US
I am looking at a carbon steel receptacle (holding tank)filled with deoxygenated water. I am concerned with MIC action. Are there any recommended biocides that should be added to the water?
Thank you,
Charley Harvilicz,
NACE CIP 206
SSPC Protective Coatings Specialist
 
Status
Not open for further replies.

Similar threads

b_unruhly
  • Locked
  • Question Question
Broken Steel Casting with crystalized structure -- Root Cause
Replies
10
Views
5K
SwinnyGG
SwinnyGG
lamar89
  • Question Question
Cold bend steel plate
Replies
3
Views
9K
TomLee777
TomLee777
S
  • Question Question
Unknown Proprietary Steel Joist Identification
Replies
2
Views
8K
TomLee777
TomLee777
mrmalcolm
  • Locked
  • Question Question
200 series austenitic stainless steel for low-temperature services
Replies
0
Views
1K
mrmalcolm
mrmalcolm
Salmet
  • Locked
  • Question Question
Internal Pickling and Passivation of Super duplex stainless steel SA 790 UNS 32750
Replies
3
Views
1K
SJones
SJones

Part and Inventory Search

Sponsor

Back
Top