Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mfg. process for 'Anisotropic Plastoferrite'

Status
Not open for further replies.
FerriteInd

FerriteInd

Mechanical
Joined
Apr 16, 2008
Messages
1
Location
IN
I am interested in knowing how anisotropic plastoferrite magnet of BHmax: 1-1.2 MGOe prepared. Specifically,
- Is it rubber or PVC which is a constituent of such magnet?
- What is the strength of magnetic field needed for orienting it?

Any info will be highly appreciated!

Thanks! :)
 
Status
Not open for further replies.

Similar threads

TMcRally
  • Question Question
Recommend a specialist for solenoid development
Replies
2
Views
1K
MagMike
MagMike
Clyde38
  • Locked
  • Question Question
Rated temperature for magnets
Replies
6
Views
1K
EdStainless
EdStainless
Clyde38
  • Locked
  • Question Question
Max temperature for Neodymium
Replies
3
Views
882
MagMike
MagMike
Cheetos
  • Locked
  • Question Question
Surface treatment on steel for NiCuNi magnet bonding
Replies
7
Views
577
hacksaw
hacksaw
Matschef
  • Locked
  • Question Question
How to evaluate and limit the remanent force of a solenoid actuator ?
Replies
2
Views
1K
Matschef
Matschef

Part and Inventory Search

Sponsor

Back
Top