triggerguard1
Mechanical
I'm useing 2001 plus on an AMD 2100, with 98SE Windows. I'm getting the same error everytime that I fire it up. It was working great before, but just quit. Any ideas?
Please Help
Please Help
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
mfc42.dll
- Thread starter triggerguard1
- Start date
- Status
Hi triggerguard1,
It´s a little difficult to solve this problem once SolidWorks always recomend Pentium Processor and NT based OS. It's easier change your hardware and OS.
It can be more expensive, but it will be faster to work with this configuration. You'll see.
I hope it can helps.
Regards,
MHendler
It´s a little difficult to solve this problem once SolidWorks always recomend Pentium Processor and NT based OS. It's easier change your hardware and OS.
It can be more expensive, but it will be faster to work with this configuration. You'll see.
I hope it can helps.
Regards,
MHendler
- Status
Similar threads
- Locked
- Question
- Locked
- Question