Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Metric and Unified tap tolerance values 2

Status
Not open for further replies.
tharris

tharris

Mechanical
Joined
Jan 16, 2003
Messages
1
Location
AU
Is anyone aware of a chart that defines the values (measurement in mm or percentage) of the size variations for tap tolerances? For example: 6HX, 6GX, 3B, etc.

Any help would be appreciated.
 
Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

D
  • Question Question
Drilling oversized and drilling undersized on Fanuc machine?
Replies
5
Views
6K
SamuelPrescott4
SamuelPrescott4
Ermak
  • Locked
  • Question Question
Fiberlaser 6kw and ss201LN
Replies
0
Views
496
Ermak
Ermak
CTengIS
  • Locked
  • Question Question
Machining marks and surface texture
Replies
1
Views
606
CWB1
CWB1
yoshiKoshi
  • Locked
  • Question Question
Calculating linear/thrust force from a linear ball screw and motor combinaton
Replies
2
Views
2K
yoshiKoshi
yoshiKoshi
Radius1
  • Locked
  • Question Question
CNC Op 10 and Op 20
Replies
2
Views
2K
enginesrus
enginesrus

Part and Inventory Search

Sponsor

Back
Top