Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Meshing Imported Geometry in CosmosWorks
- Thread starter chris9
- Start date
- Thread starter
- #2
chris9,
I have run across the problem of meshing imported parts in cosmos even if it is defeatured because of the intricate geometry. I tried several mesh sizes form coarse to fine but alas it doesn't seem to work. Please let me know if you come across similar problem and if you were able to solve it. Thanks
ahad
I have run across the problem of meshing imported parts in cosmos even if it is defeatured because of the intricate geometry. I tried several mesh sizes form coarse to fine but alas it doesn't seem to work. Please let me know if you come across similar problem and if you were able to solve it. Thanks
ahad
- Status
Similar threads
- Question
- Locked
- Question