Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mesh Transfer

Status
Not open for further replies.
eroque

eroque

Civil/Environmental
Joined
Jun 20, 2016
Messages
92
Location
PT
Hi,

So, i have a block of reinforced concret. This model is an assembly of two parts : A steel grid and a concret block (with the steel grid negativa inside).

I generated the steel mesh, but i would like to copy the mesh from the steel grid to his concret negative.

Is this possible ?

Thanks in advance.
 
Status
Not open for further replies.

Similar threads

swahlgren
  • Question Question
Splitting part while keeping mesh
Replies
2
Views
14K
swahlgren
swahlgren
IcarusAero223
  • Question Question
Mesh singularity on non-manifold geometry
Replies
5
Views
11K
IcarusAero223
IcarusAero223
E
  • Locked
  • Question Question
Mesh Problem
Replies
1
Views
2K
FEA way
FEA way
K
  • Question Question
Trouble Meshing Imported SolidWorks Part in Abaqus – Need Help with Hex or Hex-Dominated Mesh
Replies
2
Views
12K
Simfinite engineering
Simfinite engineering
AlanSYH_
  • Locked
  • Question Question
Mesh Convergence Test
Replies
6
Views
1K
AlanSYH_
AlanSYH_

Part and Inventory Search

Sponsor

Back
Top