Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
MENU 1
- Thread starter spottydot
- Start date
-
1
- #2
Hi,
Yes, there is a way to change the mb3 options.
I've done this before a year and I can tell you there is enough information in the help files. The menu file is located in <install dir>\UGII\menus and the file's name is ug_view_popup.men. You can open it with any text editor you like. For the syntax please review the documentation.
I hope this helped.
_____________________________________
"...standards are great because they give nonconformists something to not conform to..."
_________________
Penkov, Peter I.
Non-standard Equipment Designer
Yes, there is a way to change the mb3 options.
I've done this before a year and I can tell you there is enough information in the help files. The menu file is located in <install dir>\UGII\menus and the file's name is ug_view_popup.men. You can open it with any text editor you like. For the syntax please review the documentation.
I hope this helped.
_____________________________________
"...standards are great because they give nonconformists something to not conform to..."
_________________
Penkov, Peter I.
Non-standard Equipment Designer
The 'out of the box' bitmaps are hard-coded into the software & you cannot access them directly. However, you can copy them using screen capture/print screen & then paste them into an image editing or icon making software.
Tim Flater
Senior Designer
Enkei America, Inc.
Tim Flater
Senior Designer
Enkei America, Inc.
- Status