Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
melmaine formaldehyde polymerisation model
- Thread starter dust123
- Start date
Please refrain from messenger abbreviations; not everyone here is a native English speaker.
TTFN (ta ta for now)
I can do absolutely anything. I'm an expert! faq731-376 forum1529 Entire Forum list
TTFN (ta ta for now)
I can do absolutely anything. I'm an expert! faq731-376 forum1529 Entire Forum list
MikeHalloran
Mechanical
I have worked with the stuff.
You mix two precursors, and some pigment if you don't like coral pink.
The mixture becomes sticky.
Heat it and it gets less sticky, and then runs,
and at ~160F it oozes a crapload of water while absorbing heat,
then continue heating it
and it gets more viscous,
and eventually gets rigid.
I would not expect any sort of model to be 'simple'.
Mike Halloran
Pembroke Pines, FL, USA
You mix two precursors, and some pigment if you don't like coral pink.
The mixture becomes sticky.
Heat it and it gets less sticky, and then runs,
and at ~160F it oozes a crapload of water while absorbing heat,
then continue heating it
and it gets more viscous,
and eventually gets rigid.
I would not expect any sort of model to be 'simple'.
Mike Halloran
Pembroke Pines, FL, USA
- Thread starter
- #4
So, I am searching a usefull model - robust do you have something like that? I do not need a model with set of ODE a simple correlation or n-th order kinetic eqaution would be enough. Does somebody has something like that? Can you give me some references literatur anything? Thanks in advance
MikeHalloran
Mechanical
Call Georgia-Pacific.
Mike Halloran
Pembroke Pines, FL, USA
Mike Halloran
Pembroke Pines, FL, USA
- Status
Similar threads
- Locked
- Question
- Locked
- Question